Localisation - Honeywell X Series User Manual

(Main Menu > Configure > Setup > Edit Setup> General > Factory > Resets)
This will remove the current setup from the recorder and return to the default setup. When
you select this button the "Reset Setup Warning" box will appear with a message: "Are you
sure you want to clear your current setup? This is irreversible and will restart the re-
corder". Select OK to reset the setup or Cancel to ignore and return to the Factory menu.
This will remove the current layouts from the recorder and return to the default layout. When
you select this button the "Reset Layout Warning" box will appear with a message: "Are
you sure you want to clear your current layouts? This is irreversible and will restart
the recorder". Select OK to reset the layouts or Cancel to ignore and return to the Factory
menu.
This will remove all log and chart data from the recorder. When you select this button the
"Reset Data Warning" box will appear with a message: "This will delete ALL log and
chart data, taking approx 80s to complete and will restart during the process". Select
OK to reset the data or Cancel to ignore and return to the Factory menu.
This will remove the current setup, current layouts and chart and log data from the recorder
and return to the default setup. When you select this button the "Reset All Warning" box
will appear with a message: "This will reset all data including setups, layouts, and chart
and log data. This is irreversible and will restart the recorder. Are you sure you wish
to continue?". Select OK to Reset All or Cancel to ignore and return to the Factory menu.
(Main Menu > Configure > Setup > Edit Setup > General > Factory > Localisation)
Set up the recorder for native language use and global settings including:
43-TV-25-30 Iss.6 GLO Aug 07 UK
Resets
Setup
Layout
Data
Reset All

Localisation

• Language - Select native language menu prompts from list.
• Help Language - Select native language for Help Files, currently English only availa-
ble.
• Time Zone - Select the corresponding time zone from the drop down list.
• Daylight Saving - Toggle On or Off to activate daylight saving, if applicable. When the
time zone is selected and daylight saving is active the recorder will change the daylight
saving hour automatically. The date this occurs depends on the time zone selected.
Some time zones do not have daylight saving. Data being recorded will be affected,
either with a 1 hour gap of data or a 1 hour overlap of data.
• Temp.Units - Select the Temperature Units that the recorder is set to for temperature
measurement. Pen scale units may need to be changed accordingly. See Pen Scale.
• Line Hz – Toggle between 50Hz or 60Hz. Mains power frequency. Used to optimise
analogue input filtering. Note: The default value is set based on the model number but
can be changed here.
• Paper Size - Switch between A4 or Letter
107