Event Causes; Scheduled Events - Honeywell X Series User Manual

A scheduled event can be set up as a cause so that when a scheduled event occurs it trig-
gers an effect. With scheduled events you can specify the time and date for something to
happen. Eg. A schedule can be setup every weekday at 12.00pm to send an Email.
88

Event Causes

• Alarms - Set to cause an event when a pen goes Into Alarm, Out of Alarm or an Alarm
is Acknowledged. Set the pen number and the Alarm that will trigger this event.
• Totalisers - Set to cause an event when a totaliser Starts, Stops or is Reset. Select
which pen has been set up as a totalise pen to trigger this event
• Digital Inputs - Set to cause an event when a Digital Input is turned On, Off or has a
State change. Select the Digital to trigger this event.
• TC Burn Out - Select which analogue input has a thermocouple on that will trigger this
event when it goes into a burnout state.
See "Scheduled Events".
• Scheduled -
See "User Counters" on page 90.
• User Counters -
• Max Mins (Reset) - A manual reset of the Max/Min values by the user can be used as a
cause to then trigger an effect. Max Min values can be reset in the process menu, see
"Max/Min" on page 151
An occurrence in the system can be used as a cause to trigger an
• System -
event effect. System occurrences include Power On, Setup Change, Internal
Memory Low, Export Memory Low and FTP Memory Low. The system moni-
tors the memory storage levels and triggers the alert when the low level set is
reached. To set the memory low level go to the Edit Recording menu, go to
"Storage Alarm" on page 118.
• User Action - Select a User action such as placing a mark on the chart as a cause to
trigger and event
Use a batch control as a cause to trigger an event effect. An event
• Batch -
cause can be set up so that when you Start, Stop or Pause a batch it will cause
an effect to occur. Batches work using groups of pens so when setting up an
event with a batch control as a cause you must assign a group of pens.
"Groups" on page 112.

Scheduled Events

.
See
43-TV-25-30 Iss.6 GLO Aug 07 UK