Factory; Credits - Honeywell X Series User Manual

(Main Menu > Configure > Setup > Edit Setup> General > Factory)
The Factory menu contains information on the Firmware Credit System, Upgrading the re-
corder Firmware, CJC and Analogue Input Card Calibration, Demo Traces, Reset Setup
function and a Localisation menu.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
(Main Menu > Configure > Setup > Edit Setup> General > Factory > Credits)
The Credit menu contains the Serial No. of the recorder, how may credits are available, dis-
plays the Options Code and lists what Firmware Options are currently active.
102

Factory

• Credits - The Credit menu contains the Serial no. of the recorder, how many credits are
available, displays the Options Code and lists what Firmware Options are currently
See "Credits" on page 102
active.
• FW Upgrade - The Firmware Upgrade button allows new versions of the recorder
firmware to be loaded into the recorder.
• Calibration - Analogue In and CJC Calibration can be performed per slot (card).
"Calibration" on page 103
• Demo Traces - A set of demo traces are available for demonstration or simulation pur-
See "Demo Traces" on page 106
poses.
• Reset Setup - Select this to clear the current setup. A Warning message will appear
before activating the reset.
• Localisation - Set up the recorder for native language use and global settings.
"Localisation" on page 107

Credits

• Serial No. - read only and cannot be edited.
• Credits - read only and cannot be edited. It displays the number of Credits available to
activate additional firmware functionality.
See "FW Upgrade" on page 103
See "Resets" on page 107.
See
See
43-TV-25-30 Iss.6 GLO Aug 07 UK