Making Option Settings (Option); Assigning Functions To Footswitches Or Pads (Control) - Roland V-Drums TD-27 Reference Manual

Making Various Settings (SYSTEM)

Making Option Settings (OPTION)

Here you can make settings for the MIX IN jack's input
level and the display contrast, and assign functions to the
footswitches and pads.
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select "OPTION" and
press [ENTER] button.
The option settings screen appears.
3
Press the [F1] (MIX IN)–[F4] (MODIFY) buttons
to select the item that you want to edit.
Button Explanation
Adjusts the input level of the MIX IN jack and
[F1] (MIX IN)
Bluetooth audio.
Adjusts the contrast and brightness of the
[F2] (LCD)
display.
Assigns functions to the footswitches and
[F3] (CTRL)
pads.
Specifies the duration for which to display
[F4] (MODIFY) the window that briefly appears when you
turn a sound modify knob.
Reference
For details on the parameters that can be edited, refer to
"Data List" (PDF).
4
Use the cursor buttons to select a parameter
and turn the dial to edit the value.
5
Press the [DRUM KIT] button to return to the
DRUM KIT screen.
Assigning Functions to Footswitches or
Pads (CONTROL)
Footswitches (BOSS FS-5U, FS-6; sold separately) or pads
that are connected to the TD-27 can be assigned to control
functions such as switching drum kits or switching set lists.
Reference
For details on the parameters that can be edited, refer to
"Data List" (PDF).
60
Assigning a function to a footswitch
Connecting an FS-5U
Stereo 1/4" phone type
1/4" phone type x 2
RING
SW1 SW2
* If you use a mono cable to connect a single FS-5U, it will
operate as SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
Stereo 1/4" phone type
Stereo 1/4" phone type
SW1
SW2
1
Press the [SYSTEM] button.
The SYSTEM screen appears.
2
Use the cursor buttons to select "OPTION" and
press [ENTER] button.
The option settings screen appears.
3
Press the [F3] (CTRL) button.
FOOT SWITCH/PAD CONTROL screen appears.
4
Use the cursor buttons to select a parameter,
and use the dial to edit the value.
MEMO
If you want to switch drum kits in the set list (p. 18) by
striking a pad, set the pad's assigned function to "KIT#
DEC" or "KIT# INC, " and then turn on set lists in the DRUM
KIT screen. (Make the set list setting in advance.)
TIP
POLARITY switch
MODE/POLARITY switch