Internal Message System - Ericsson BUSINESSPHONE 250 System Administrator Manual

INTERNAL MESSAGE
SYSTEM GENERAL
CONTROL INTERNAL
MESSAGE
FUNCTIONS
(continued)
BusinessPhone 250 - System Administrator´s Guide
BusinessPhone 50 - System Administrator´s Guide

INTERNAL MESSAGE SYSTEM

Internal message system means that messages can be sent from
one extension to another. There are three kinds of message:
• "Call-back" message
• Voice message
• Text message
You can control if an extension is allowed to send messages,
return messages or control messages for others via the selected
category list, see section "Control internal message functions".
Regarding message functions that can be controlled by the
extension users themselves, see the related user´s guides.
The total handling capacity for the system is 1000 messages.
Notes: Messages are protected in the event of power failure. All
recorded messages will be erased, if a cold start is made.
The number of message keys are the same as number of program-
mable keys, see chapter "Allocate number of programmable keys".
To allow access of a certain message function:
Set one of the following commands to "YES"
See chapter "Category lists".
Command Function
3014 Send message from others ?
3015 Send voice message ?
3016 Send text message ?
3017 Send "call me" message ?
3066 Return messages ?
3067 Control messages ?
43