Internal Messages - Ericsson BusinessPhone 50 User Manual

z#
z#
h )
Message
BusinessPhone – Operator's Console

Internal Messages

You can send a call-back, voice or text message when you call an
extension and receive busy tone or get no answer. This section also
describes how to record a personal voice message and how to
forward a voice message. Your incoming messages are indicated
on your telephone by a rapidly flashing message-key.
Password protection
The first time you enter the message system (only possible from
own extension) you might be requested to change your password if
it is default (0000).
Note: Some systems are programmed to allow the default
password.
The following display is shown:
12 May 10:35
C= 0 I= 0
FIRST MBX USE-ENTER NEW PASSWORD:
Enter your new password and press
If you use the default password, you are requested to try again.
Enter your password again and press
The new password is saved.
Press to finish the procedure
or
Continue with any of the message functions
If you want to change your password again, see section
password" on page 73.
+15°^|| OPERATOR
||
||
Internal Messages
200
"Select
39