Start System Programming - Ericsson BUSINESSPHONE 250 System Administrator Manual

START SYSTEM PROGRAMMING

START SYSTEM
PROGRAMMING
GENERAL
Display info during
system programming
15 Sep 10:36
ASSOCIATED NUMBER
backward
0302
XXXX
6
The BusinessPhone 250 / BusinessPhone 50 programming
can be performed via system or individual programming.
This guide describes how you perform system programming
via the Executive telephone (Dialog 3213). For a detailed
description of this telephone, see the user´s guide (Article
no.: EN/LZTBS 102 096).
System programming is basically performed via command
groups and numbers, see chapter "Command groups and
numbers". To see available functions for the different tele-
phone types, see the user´s guide for the related telephone.
Notes: This guide describes basic system programming proce-
dures. Individual programming procedures are described in the
related telephone user´s guides. All function descriptions in this
guide starts when you have entered "command mode" if nothing
else is indicated.
As it is possible for extension users to do system programming,
you should change the password first, see chapter "Password".
The upper line shows general information. The mid line shows
command name, command number and values. The lower line
presents lead texts for the menu keys.
+15°
forward
Command number
Value (e.g. directory number)
YY
Value (e.g. key number)
ZZ
Value (e.g. "YES" or "NO")
For further explanation of the display messages, see chapter
"Navigation and editing during programming".
C 0302 XXXX YY
c/i return
BusinessPhone 250 - System Administrator´s Guide
BusinessPhone 50 - System Administrator´s Guide
ZZ