Inserting The Date And Time On A Still Image - Sony Cyber-Shot DSC-P32 Operating Instructions Manual

Inserting the date and time on a still image

Camera
Moving Image: MPEG Movie
Smart Zoom: On
Date/Time: Off
Red Eye Reduction: Off
AF Illuminator: Auto
SELECT
1
, Set the mode selector to SET
UP.
The SET UP screen appears.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, and
displayed in the upper-left portion of the LCD
screen instead. The actual date and time are
indicated in red on the lower-right corner when
the image is played back.
2
, Select (Camera) with v on
the control button, then press
B.
Select [Date/Time] with v/V,
then press B.
is
Camera
Moving Image: Day&Time
Smart Zoom: Date
Date/Time: Off
Red Eye Reduction:
AF Illuminator:
OK
3
, Select the date and time setting
Day&Time: Inserts the date and the time of
shooting into the image
Date: Inserts the year, the month and the
date of shooting into the image
Off: Does not insert date/time data into the
image
After the setting has been completed, set the
mode selector to
• When you chose [Date], the date will be
• This setting is maintained even when the power
Camera
Moving Image:
Smart Zoom:
Date/Time:
Red Eye Reduction:
AF Illuminator:
PAGE SELECT
with v/V on the control button,
then press z.
to shoot your image.
inserted in the order set in "Setting the date and
time" (page 21).
is turned off.
MPEG Movie
On
Date
Off
Auto
35