Inserting The Date And Time On A Still Image - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Inserting the date and time on a still image

DISC TOOL
FINALIZE :
FORMAT :
INITIALIZE :
UNFINALIZE :
SELECT
1
, Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time do not appear on the LCD
screen during shooting, instead, "
in the upper left corner of the LCD screen. The
actual date and time appear during playback
only.
32
2
, Select
on the control button, then
press B.
Select [DATE/TIME] with v/V,
then press B.
• If you select [DATE], the date is superimposed
" appears
onto the image in the order selected with
"Setting the date and time" (page 17).
• On MVC-CD250, the [HOLOGRAM AF] item
is displayed as [AF ILLUMINATOR] and the
[BRACKET STEP] (page 116) item is not
displayed in
CAMERA
MOVING IMAGE : DAY&TIME
DATE/TIME : DATE
DIGITAL ZOOM : OFF
BRACKET STEP :
RED EYE REDUCTION :
HOLOGRAM AF :
OK
[CAMERA] with v/V
[CAMERA].
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
BRACKET STEP :
RED EYE REDUCTION :
HOLOGRAM AF :
PAGE SELECT
3
, Select the date and time setting
with v/V on the control button,
then press z.
DAY & TIME: Superimposes the date,
hour, and minute onto the image.
DATE: Superimposes the year, month and
day onto the image.
OFF: Does not superimpose the date and
time onto the image.
After the setting has been completed, set the
mode dial to , and shoot the image.
• You can also shoot images with the mode dial
set to S*, A*, M* or SCN.
• This setting is maintained even when the power
is turned off.
* MVC-CD400 only
MPEG MOVIE
DATE
ON
±0.7EV
OFF
AUTO