Inserting The Date And Time On A Still Image - Sony DSC-V3 Fall 2005 Operating Instructions Manual

• The image through the fi nder does not indicate
the actual recordable range. This is due to
parallax. To confi rm the recordable range, use
the LCD screen.
• Just as with the AE/AF lock indicator on the
LCD screen, when the AE/AF lock lamp of the
fi nder section stops fl ashing and remains on,
you can start shooting (page 30).
• When the LCD screen is turned off:
– The digital zoom does not function (page 31).
– [AF Mode] is set to [Single] (page 68).
– If you press (Flash mode)/
(Macro), the image will be displayed
on the LCD screen for approximately two
seconds so you can check or change the
setting.
• When shooting/viewing movies, the status of
the LCD screen changes as follows: Indicators
off  LCD screen off  Indicators on
• For a detailed description of the indicators, see
page 149.
• For a detailed description of the histogram, see
page 62.
• This setting is maintained even when the power
is turned off.
Inserting the date and time
on a still image
Camera 1
AF Mode:
1
Digital Zoom:
2
Date/Time:
Red Eye Reduction:
1
Hologram AF:
2
Auto Review:
SELECT
1
(Self-timer)/
 Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time are not inserted in Multi
Burst mode.
• The date and time do not appear on the LCD
screen during shooting, instead,
appears on the LCD screen. The actual date
and time appear in red on the lower-right
corner during playback only.
Single
Smart
Off
Off
Auto
Off
indicator
Camera 1
AF Mode:
1
Digital Zoom:
2
Date/Time:
Red Eye Reduction:
1
Hologram AF:
2
Auto Review:
2
 Select (Camera 1) with  on
1
the control button, then press
.
Select [Date/Time] with /,
then press .
Day&Time
Date
Off
37