Setting the still image size
Mode selector
1
, Set the mode selector to
24
3.1M
3.1M
2.8M(3:2)
2.0M
1.2M
VGA
Image Size
2
, Turn on the camera, then press
.
(Image Size).
The Image Size setup item appears.
• For more information about the image size, see
page 25.
3.1M
2.8M(3:2)
2.0M
1.2M
VGA
Image Size
3
, Select the desired image size
with v/V on the control button.
The image size is set.
After the setting is completed, press
(Image Size). The Image Size setup item
disappears from the screen.
• The image size value selected here is preserved
even when the camera is turned off.
VGA