Table of Contents
Advertisement
Inserting the date and time on a still image
Camera
AF Mode:
Single
Digital Zoom:
Smart
Date/Time:
Off
1
Red Eye Reduction:
Off
AF Illuminator:
Auto
2
Auto Review:
Off
SELECT
1
, Set the mode dial to SET UP.
The SET UP screen appears.
• The date and time is not inserted in Multi Burst
mode.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time do not appear on the LCD
screen during shooting, instead,
appears on the LCD screen. The actual date and
time appear in red on the lower-right corner
during playback only.
2
, Select
the control button, then press
B.
Select [Date/Time] with v/V,
then press B.
indicator
Camera
AF Mode:
Day&Time
Digital Zoom:
Date
Off
Date/Time:
1
Red Eye Reduction:
AF Illuminator:
2
Auto Review:
(Camera) with v on
Camera
AF Mode:
Digital Zoom:
Date/Time:
1
Red Eye Reduction:
AF Illuminator:
2
Auto Review:
PAGE SELECT
3
, Select the date and time setting
with v/V on the control button,
then press z.
Day&Time: Superimposes the date, hour,
and minute onto the image.
Date: Superimposes the year, month and
day onto the image.
Off: Does not superimpose the date and
time onto the image.
After the setting has been completed, set the
mode dial to
, and shoot the image.
• You can also shoot with the mode dial set to P,
M,
,
,
,
,
or
• If you select [Date], the date is superimposed
onto the image in the order selected in "Setting
the date and time" (page 18).
• This setting is maintained even when the power
is turned off.
Single
Smart
Day&Time
Off
Auto
Off
.
33
Advertisement
Table of Contents
