Inserting The Date And Time On A Still Image - Sony Cyber-shot DSC-FX77 Operating Instructions Manual

Inserting the date and time on a still image

CAMERA
MOVING IMAGE: MPEG MOVIE
DATE/TIME: OFF
RED EYE REDUCTION: OFF
AF ILLUMINATOR: AUTO
SELECT
1
, Set the MODE dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, instead,
displayed in the upper left portion of the LCD
screen. The actual date and time are indicated
in red in the lower-right corner when the image
is played back.
30
2
, Select (CAMERA) with v on
the control button, then press
B.
Select [DATE/TIME] with v/V,
then press B.
is
CAMERA
MOVING IMAGE: DAY&TIME
DATE/TIME: DATE
RED EYE REDUCTION: OFF
AF ILLUMINATOR:
OK
CAMERA
MOVING IMAGE:
DATE/TIME:
RED EYE REDUCTION:
AF ILLUMINATOR:
PAGE SELECT
3
, Select the date and time setting
with v/V on the control button,
then press z.
DAY&TIME: Inserts the date and the time
of shooting into the image
DATE: Inserts the year, the month and the
date of shooting into the image
OFF: Does not insert date/time data into the
image
After the setting has been completed, set the
MODE dial to , and continue your shooting.
• When you chose [DATE] in Step 3, the date
will be inserted in the order set in "Setting the
date and time" (page 18).
• You can insert the date and time even when the
or
MODE dial is set to P SCN.
• This setting is maintained even when the power
is turned off.
MPEG MOVIE
DATE
OFF
AUTO