Set Up Items - Sony Cyber-Shot DSC-P32 Operating Instructions Manual

SET UP items

Set the mode selector to SET UP. The SET
UP screen appears.
Factory settings are indicated with x.
(Camera)
Item
Moving Image
Smart Zoom
(DSC-P52/P72 only)
Date/Time
Red Eye Reduction
AF Illuminator
(Memory Stick Tool)
Item
Format
File Number
106
Setting
MPEG Movie Clip Motion
x /
Multi Burst
x On / Off
Day&Time Date Off
/ / x
On / x Off
Auto / Off
x
Setting Description
OK / Cancel Formats the "Memory Stick." Note that formatting erases all data on a "Memory Stick," including even
protected images (page 44).
x Series – Assigns numbers to files in sequence even if the "Memory Stick" is changed or the recording folder
is changed.
Reset – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording
folder contains a file, a number one higher than the largest number is assigned.)
Description
Selects the shooting mode (pages 54, 55, 72).
/
Selects whether to use the smart zoom (page 29).
Selects whether to insert the date and time into the image (page 35). When shooting
movies, or images recorded in Clip Motion/Multi Burst modes, the date and time
cannot be inserted in the image. Also, the date and time will not be displayed when
shooting. The date and time will be displayed when the image is played back.
Reduces the red-eye phenomenon when using a flash (page 33).
Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus
on the subject under dark lighting (page 33).