Inserting The Date And Time On A Still Image - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\05BAS.FM]
01cov.book Page 31 Tuesday, February 18, 2003 3:07 PM

Inserting the date and time on a still image

Camera
Moving Image: MPEG Movie
Smart Zoom: On
Date/Time: Off
Red Eye Reduction: Off
AF Illuminator: Auto
SELECT
1
, Set the mode selector to SET
UP.
The SET UP screen appears.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, and
displayed in the upper-left portion of the LCD
screen instead. The actual date and time are
indicated in red on the lower-right corner when
the image is played back.
Camera
Moving Image:
Smart Zoom:
Date/Time:
Red Eye Reduction:
AF Illuminator:
OK
2
, Select (Camera) with v on
the control button, then press
B.
Select [Date/Time] with v/V,
then press B.
is
Day&Time
Date
Off
PAGE SELECT
3
, Select the date and time setting
with v/V on the control button,
then press z.
Day&Time: Inserts the date and the time of
shooting into the image
Date: Inserts the year, the month and the
date of shooting into the image
Off: Does not insert date/time data into the
image
After the setting has been completed, set the
mode selector to
• When you chose [Date], the date will be
inserted in the order set in "Setting the date and
time" (page 17).
• This setting is maintained even when the power
is turned off.
masterpage:Right
Camera
Moving Image: MPEG Movie
Smart Zoom: On
Date/Time: Date
Red Eye Reduction: Off
AF Illuminator: Auto
to shoot your image.
31
model name1[DSC-P92]
[3-082-719-11(1)]