Sony Cyber-Shot DSC-P32 Operating Instructions Manual page 27

VGA
4
, Press the shutter button fully
down.
The shutter clicks, the shooting is
completed, and the still image is saved in
the "Memory Stick." When the recording
lamp (pages 9, 11, 13) goes out, you can
shoot the next image.
• When you are shooting with the batteries, if no
tasks are performed for a while with the camera
turned on, power is automatically shut off to
preserve battery power (page 20).
The position on the mode
101
selector
97
When the mode selector is set to
functions that can be selected change
according to the
menu settings as follows:
Program
Auto
Camera
Auto mode shooting [Auto]
You can shoot your subject easily since this
mode automatically adjusts the focus,
exposure, and white balance. In this mode,
[Mode] is set to [Fine], the AF range finder
is set to [Multi AF], and the metering mode
is set to multi-pattern metering (pages 48,
51). The menu items you can display are
limited to (Camera) and [Mode] (REC
Mode).
Program mode shooting [Program]
You can set the shooting functions in the
menu settings according to your shooting
condition.
Twilight mode [
See page 58.
, the
Twilight portratit mode [
See page 58.
(Camera) setting in the
Landscape mode [
See page 58.
Snow mode [
See page 58.
Mode
Beach mode [
See page 58.
To change the camera mode
1 Set the mode selector to
2 Press MENU.
3 Select
4 Select the desired camera mode with v/
]
]
]
]
]
.
(Camera) with b on the
control button.
V on the control button.
27