Table of Contents
Advertisement
CIP Training C7200 series
CIP Training Pro 8300 series
Adjustment Settings for Operators
Adjustment Settings for Operators
0609 Set Number of Folds for Booklet
Specify the number of booklet folds to be performed when using Booklet Finisher
SR5120. You can adjust the paper folding strength by changing the number of folds per
the booklet.
When you select "0", the default value, the finisher folds the booklet according to the
number of sheets in the booklet, as shown below.
•
1–6 sheets: 1 time
•
7–10 sheets: 2 times
•
11–30 sheets: 6 times
The value set here is added to the default values, which are 1, 2, and 3. Set a negative
value to reduce the number of times the finisher folds booklets. Set -1, -2, or -3 to not
fold booklets that have 1 to 13 sheets, 14 to 15 sheets, or 16 to 25 sheets, respectively.
Setting Items
Number of Folds for Booklet
0637 Staple Tray: Rib Installed Mode to Strengthen Paper
Set the operation when the Paper Strengthening Rib is installed to Staple Tray. This
function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting
• Before you set [Staple Tray: Rib Installed Mode to Strengthen Paper] to [On], attach
the paper strengthening ribs.
Default
Value
Setting Items
Max.
Min.
Value
Value
0
6
-6
Values
Off
On
Step
Unit
1
times
Default Value
Off
Advertisement
Table of Contents
