Mitsubishi MELSEC-A Series Reference Manual page 91

5. SPECIFICATIONS
Local station No. 2 ( 2) in third tier-1
1) The 2 station writes data to the devices in the range of B/W1C0 to 1FF and
sends it to the other stations.
2) The 2 station can receive data written to the devices in the range of B/W0
to 1BF by other stations.
3) Devices in the range of B/W200 to 3FF can be used instead of internal relays
(M) and data registers (D).
When B1C0 is turned ON in the
L1/m station, 1 station, L2/m station, and L3 station is turned ON.
Note that B1C0 in
Local station No. 1 ( '1) in third tier-2
1) The '1 station writes data to the devices in the range of B/W280 to 2BF and
sends it to other stations.
2) The '1 station can receive data written to the devices in the range of B/W0
to FF, B/W200 to 27F, and B/W2C0 to 2FF by other station.
3) Devices in the range of B/W100 to 1FF and B/W300 to 3FF can be used
instead of internal relays (M) and data registers (D).
When B280 is turned ON in the
station, L1/m station, L2/m station,
Note that B280 in
Local station No. 2 ( '2) in third tier-2
1) The '2 station writes data to the devices in the range of B/W2C0 to 2FF and
sends it to other stations.
2) The '2 station can receive data written to the devices in the range of B/W0
to FF and B/W200 to 2BF by other station.
3) Devices in the range of B/W100 to 1FF and B/W300 to 3FF can be used
instead of internal relays (M) and data registers (D).
When B2C0 is turned ON in the
L1/m station, L2/m station,
Note that B2C0 in the
REMARK
1) *: indicates the range where data can be received.
2 station, for example, B1C0 in the M station,
'1 and '2 stations is not turned ON.
'1 station, for example, B280 in the M
'2 station, and L3 station is turned ON.
1 and 2 stations is not turned ON.
'2 station, for example, B2C0 in the M station,
'1 station, and L3 station is turned ON.
1 station and 2 station is not turned ON.
5 - 13