7.
DATA LINK SETTINGS
(4)
(c) The device range that can be assigned with the second half link parameters is
the range assigned with the first half link parameters: "(final device) + 1 " or later.
(Example: If the range of B0 to FF is assigned to the first link parameters, "B100"
or later can be assigned to the second half parameters)
If 0 point is assigned with the first half link parameters, assignment with the
second half link parameters can be started with W0.
Divide the M/R area in link register (W) into the M
assign them.
Only the W0 to 3FF range can be used for the M/R area.
(a) When connecting more than one remote I/O station, assign an M
an M
R area to each remote I/O station.
For example, when connecting two remote I/O stations, divide the M
and M
R area into two stations as illustrated below and assign them.
Fig 7.25 Link register (W) assignment example
7 - 53
R area and the M
R area and
R area and
R area