7.
DATA LINK SETTINGS
(b) Refresh range setting for LW
1) The refresh destinations of LW are the link register (W).
2) The transfer size is in units of 1 point.
(c) Refresh range setting for LX/LY
1) The refresh destination of LX is the input (X), and that of LY is the output (Y)
The actual I/O and later can be set as the refresh destination.
Since this area is also used for MELSECNET/10, MELSECNET/MINI,
CC-Link, etc., assign it without overlapping.
2) The transfer size is in units of 16 points.
7 - 8