Mitsubishi MELSEC-A Series Reference Manual page 147

7. DATA LINK SETTINGS
(3)
Module type
Refresh range
Setting example
In the system configuration exemplified in Fig 7.4, an example of setting the network
refresh parameters to assign the refresh ranges in Table 7.3 is shown below.
Fig 7.4 System configuration example
MELSECNET master
station Module No. 1
LB/LW0 to FFF
LX/LY0 to 7FF
Table 7.3 Refresh ranges
Module No. 2
B/W0 to FFF
X/Y0 to 7FF
7 - 9
Module No. 3
- -