Suzuki Wagon R Manual page 1462

7D-18 TRANSFER
3) Install intermediate shaft to right case, and install snap ring.
Special tool
(A) : 09952-76011
4) Install new right case oil seal (1) to right case (2).
Special tool
(A) : 09925-15410
Transfer right case oil seal installing depth
"a" : 1.0 – 1.5 mm (0.039 – 0.059 in.)
5) Fill inside of oil seal with about 3 g (0.11 oz) grease, and
apply grease to oil seal lip.
"A" : Grease 99000-25010
6) Install bevel gear shim(s) (2) selected in item "Bevel Gear
Shim Adjustment" and driven gear bearing outer race (3) to
right case (1).
Left case
ASSEMBLY
1) Install the bevel gear shim(s) selected in item "Bevel Gear
Shim Adjustment" and driven gear bearing outer race to left
case.
2) Install new left case oil seal (1) to left case (2) by using spe-
cial tool.
Special tool
(A) : 09925-15410
Transfer left case oil seal installing depth
"a" : 1.5 – 2.0 mm (0.059 – 0.078 in.)
3) Fill inside of oil seal with about 3 g (0.11 oz) grease, and
apply grease to oil seal lip.
"A" : Grease 99000-25010