Suzuki Wagon R Manual page 1482

7F-12 REAR DIFFERENTIAL
3) Put drive bevel gear (1) on differential case (2) and fasten
them with bolts (3) by tightening them to specified torque.
Use thread lock cement for bolts (3).
CAUTION:
Use of any other bolts than that specified is prohibited.
"A" : Thread lock cement 99000-32110
Tightening torque
Drive bevel gear bolts (a) : 90 N·m (9.0 kg-m, 65.0 lb-ft)
4) Press-fit differential side bearings (3) to differential case (1)
by using special tools.
Special tool
(A) : 09951-76010
(B) : 09951-16060
2. Drive bevel gear