Suzuki Wagon R Manual page 1483

Differential carrier and drive bevel pinion
A: Dummy height of pinion form dummy 40 mm/1.757 in.
B: Radius of bearing form dummy with dummy shaft 31 mm/
1.220 in.
A+B: Mounting distance adjusting dummy total size 71.00 mm/
2.795 in.
C: Measured dimension
Special tool
(A) : 09922-76120
(B) : 09922-76250
(C) : 09922-76140
(D) : 09922-76430
(E) : 09922-76340
(F) : 09922-76150
(G) : 09922-76350
D: Drive bevel pinion mounting distance 68.00 mm/2.677
in.
E: Shim thickness for mounting distance adjustment (E =
3 mm (0.118 in.) – C)
1. Drive bevel gear
2. Front bearing
1) Assemble bearing form dummy with dummy shaft using spe-
cial tools.
Special tool
(A) : 09922-76120
(B) : 09922-76250
2) Install dial gauge (1) to bearing form dummy with dammy
shaft.
REAR DIFFERENTIAL 7F-13
3. Differential carrier
4. Rear bearing
5. Spacer
6. Drive bevel pinion