Sony SIU-100 Operating Instructions Manual page 97

DMBK-R107 Interface Board for TDIF
Connects external devices such as tape recorders that
1)
have a TDIF interface.
Notes
• This board does not function when the SIU-100/100T
is running at 88.2/96 kHz, or when the sampling
frequency of the input signal is 88.2/96 kHz.
• When the DA-88 manufactured by TEAC
Corporation is used, set a DA-88 mode to ON on the
SLOT INFO submenu of the SETUP menu or from
the personal computer.
For details, see "To confirm the presence of a board" on
page 117 and see "DMBK-R107" on page 134.
DMBK-R109 MADI Board
2 MADI/CASCADE connectors and signal display LEDs
1 MODE SELECT switch
Selects the operating mode of the DMBK-R109.
When a DMBK-R109 is inserted into the SIU-100/
100T, be sure to set this switch to MADI.
.......................................................................................................................................................................................
1) TDIF is the trademark of the interface of TEAC Corporation.
Specifications
Connector: D-SUB 25-pin (female)
4 MADI connectors
3 INPUT SELECT switch
The MASTER and SUB modes are special modes to
be used when a DMBK-R109 is inserted into the
DMX-R100. These modes do not function correctly
when the board is inserted into the SIU-100/100T.
1 MODE SELECT switch
5 WORD SYNC connectors and 75 ohm termination
switch
97