Sony SIU-100 Operating Instructions Manual page 95

DMBK-R103 8CH AES/EBU DIO Board
1 AES/EBU DO connectors
1 AES/EBU DO (AES/EBU digital signal output)
connectors
Outputs AES/EBU signals.
2 AES/EBU DI (AES/EBU digital signal input)
connectors
Inputs AES/EBU signals.
DMBK-R104 8CH Sampling Rate Converter DI Board
1 SAMPLING RATE CONVERTER DI (optical
digital audio signal input) connectors (XLR/optical
type)
Inputs AES/EBU signals or optical signals such as
those from consumer CD players. The SLOT INFO
submenu of the SETUP menu allows you to set the
sampling converter function to on or off.
2 AES/EBU DI connectors
1 SAMPLING RATE CONVERTER DI connectors
Specifications
Input connectors: XLR-3-31 (female) × 4
Output connectors: XLR-3-32 (male) × 4
Notes
• You cannot use both connectors at the same time.
Connect the external device to either one.
• The upper input frequency of the sampling rate
converter is 56 kHz and it cannot convert double
sample rate signals of 88.2/96 kHz to 44.1/48 kHz.
• When the sampling frequency of the SIU-100/100T is
set to 88.2/96 kHz, the board functions automatically
as a DI board without a sampling converter.
Specifications
Connector: XLR-3-31 type, × 4, Optical type × 4
95