Sony SIU-100 Operating Instructions Manual page 123

Resetting the current settings to the
default values
The SRAM CLEAR menu allows you to clear all of
the settings, such as routing and so on, and reset them
to the default values. This function resets only current
operating settings to the defaults, and does not affect
scenes stored.
1
Enter the SRAM CLEAR submenu by displaying it
on the LCD.
2
Push the ENTER button.
The confirmation mark "?" is displayed.
3
Push the ENTER button to reset the settings to the
defaults.
"Completed" is displayed. At this time, the
operating status of the SIU-100/100T is not
changed.
To cancel the reset
Push the CANCEL button.
4
Turn the power of the SIU-100/100T off, and the
turn on again.
The SIU-100/100T restarts under the default
settings.
For detailed information on default settings, see
"Default Settings of the SIU-100/100T" on page 150.
Storing the current operation settings in
non-volatile memory as backup data
The SYSTEM BACKUP submenu allows you to store
the current operation settings in non-volatile memory
(flash memory), including settings that are not
included in scenes. The SYSTEM RESTORE submenu
allows you to recall this backup data.
When the message "Battery Trouble" appears, you can
store the settings that are to be stored in the volatile
memory (SRAM memory) under normal operating
status quickly and safely.
For detailed information on the "Battery Trouble" message ,
see "Error Messages" on page 148.
1
Enter the SYSTEM BACKUP submenu by
displaying it on the LCD.
2
Push the ENTER button.
The confirmation mark "?" is displayed.
3
Push the ENTER button to store the settings as
backup data.
"Completed" is displayed.
The operating status of the SIU-100/100T is not
changed.
To quit the backup
Push the CANCEL button.
123