Sony SIU-100 Operating Instructions Manual page 130

Making Settings Using a Personal Computer
3 Display channels of another output slot and
confirm their routings.
Click the [OUTPUT SLOT] button
corresponding to the desired output slot
number. Or click the [Prev] or the [Next]
button. Each time you click the button, the
page changes in units of slots.
OUTPUT SLOT button
Prev button
Setting routings for each channel
The Edit Mode of the Channel to Channel page of the
Routing page allows you to set routings among
channels.
1
Display the input channel and output channel to be
routed performing the operations outlined in
"Confirming the routings in units of channels" on
page 129.
130
2
Click the radio button of the cross point of the
input channel and output channel to be routed.
Note
You can assign multiple output channels to one
input channel.
To cancel the routing
Next button
Click the radio button in the N.C column.
3
Assign routings of the remaining input and output
channels between slots displayed by repeating
steps 1 and 2.
Note
When a desired output channel is not displayed on
the same page, move to the proper page by clicking
the [Prev] or the [Next] button. Be sure to click the
[APPLY] button in step 4 on that page before
moving to another page. If you move to another
page before clicking the [APPLY] button, settings
made on that page become ineffective.