Programming The Lockout Feature; Level Lll Cycle Programming - C Values - Pentair Pro Elite Professional Series Operation Manual

Programming the Lockout Feature

All parameters can be locked out when the control is in
Level ll programming. Simply press the REGEN button
during Level ll programming and a Lock icon will appear
indicating that the specific setting has been locked out.
When locked out, the setting cannot be adjusted. To
disable the Lock Out Feature, press the REGEN button
when in Level ll. The lock icon will not be displayed.
Level lll Cycle Programming – C Values
Several Level III program parameters can be adjusted
to fine-tune a conditioner' s operation for non-standard
applications. Typically these parameters will not need to
be adjusted, as the default settings accommodate most
applications. Contact your Water Treatment Professional
before attempting any programming. The parameters
are accessible by pressing and holding the UP and SET
buttons until the display shows a "C" value.
Note: The control must be in the treated water position
to change settings.
C# Description
C1 Backwash
C2 Regenerant Draw
C3 Slow Rinse
C4 Repressurization
C5 Fast Rinse
C6 2nd Backwash
C7 2nd Fast Rinse
C8 Regenerant Refill
C0 Service/Brine Prep
22 • PENTAIR Pro Elite Professional Series Pro Elite Demand Instruction Manual
Range Minimum
Increments
0 – 200 1 Min
Not
1 Min
Adjustable
0 – 200 1 Min
0 – 200 1 Min
0 – 200 1 Min
0 – 200 1 Min
0 – 200 1 Min
Not
1 Min
Adjustable
0 - 200 1 Min
Default
Setting
Flow rate dictated by size of drain line flow
10
controller
Automatically calculated from resin volume
See Notes
and salt dosage settings
Automatically calculated from resin volume
See Notes
and salt dosage settings
Allows system to equalize water pressure
3
across valve discs
4 Rinses residual regenerant from tank
Disperses non-regenerated areas of the
1
resin bed
1 Rinses to Quality
Automatically calculated from resin volume
See Notes
and salt dosage settings
Used when P r is set to 1. Brine prep allows
120 brine to come up to concentration after
refill.
Notes