Level Ii Programming - P Values - Pentair Pro Elite Professional Series Operation Manual

Level II Programming – P Values
Level II program parameters can be adjusted and used
to fine-tune the conditioner' s operation. The parameters
are accessible by pressing and holding the UP and DOWN
buttons until the control displays a "P" value. Note: The
control must be in the home position to change settings.
See Table below for Level ll parameters. Typically the
Level ll parameters will not need to be adjusted, as
the default settings accommodate most applications.
Contact your Water Treatment Professional before
attempting any programming.
P# Description
P9 Units of Measure
P10 Clock Mode
P11 Service Interval
Remote switch
P12 delay for
regeneration
Chlorine Generator
P13
Options
P14 Refill Rate
P15 Draw Rate
P16 Reserve Type
Initial average or
P17
fixed reserve
P18 Flow sensor select
K-factor or Pulse
P19
Equivalent
P r Refill First
Remote switch
P d
operation
Notes: (1) Default selected with valve type and resin volume.
(2) Factory Default is "0" for North America and "1" for World Units.
Minimum
Range
Increments
0 - 1 1
0 - 3 1
0 - 250 1
3 - 250 1
0 - 2 1
1 - 700 1
1 - 700 1
0 - 3 1
0 - 70 1
0 - 5 1
1.0 -
0.01
99.99
1
0 - 9999
0 - 1 1
0 - 1 1
Default Units
(2) 0 = US 1 = Metric
0 = 12 Hr Clock, flow rate displayed
1 = 24 Hr Clock, flow rate displayed
(2)
2 = 12 Hr Clock, time of day displayed
3 = 24 Hr Clock, time of day displayed
0 Months Uses 30 days for each month.
Time remote switch must be active to start
60 Seconds regeneration on 742 time clock units.
0 = No Chlorine Generator
0 1 = Salt Check Only
2 = Generate Chlorine
(1) gpm x 100
(1) gpm x 100
0 = Variable reserve delayed regeneration
1 = Fixed reserve delayed regeneration
0
2 = Variable reserve immediate regeneration
3 = Fixed reserve immediate regeneration
% of Depends on value entered in P16.
30
Capacity
0 = Internal Magnum NHWB
1 = 1" Pro Elite turbine
2 = 2" Pro Elite turbine
(1)
3 = User define K-factor
4 = User define Pulse Equivalent
5 = Internal Magnum HWB
K-factor P18 = 3
0.01
Pulse Equivalent P18 = 4
1
0 = Refill first off
0
1 = Refill first on
0 = Immediate Regeneration
0
1 = Delayed Regeneration
PENTAIR Pro Elite Professional Series Pro Elite Demand Instruction Manual • 21
Notes