Host Verification - GE LOGIQ 500 Advanced Reference Manual

Storage/Print Option

Host Verification

LOCAL HOST NAME
LOCAL IP ADDRESS
NETMASK
AE TITLE
DEVICE
1.
2.
3.
4.
5.
6.
7.
-.
IP ADDR
[EXECUTE]
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
9–8
When the network is configured properly in the Network
Configuration Menu, the DICOM (Network) function will be
available after the system is turned on.
Before sending an image, it is recommended that
communication between the LOGIQ
devices be verified. The Host Verification Menu provides this
function.
[HOST VERIFICATION MENU]
:
:
:
:
[HOST INFORMATION]
AE TITLE VERIFY?
Y
Y
N
[ PING ]
[NETCONF MENU]
Message Area
Figure 9–7. Host Verification Menu
Most information in the Host Verification Menu comes from the
Network Configuration Menu. The only field that can be edited
is "Verify?" under [Host Information].
Input a "Y" into this verify field to execute a DICOM verify or an
"N" or "No Input" to ignore a specific device.
Trackball to the [EXECUTE] command and press Set. The
result field will display the results of the DICOM verify as
"Successful" or "Failed".
500 and other host
RESULT
SUCCESSFUL
FAILED
SUCCESSFUL
[QUEUE MENU]
[ EXIT ]
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0