OB–Multigestational
Overview
Patient Entry Menu
Entering Fetus Number
.
4–22
OB–Multigestational
The LOGIQ
500 offers an optional calculation package that
allows the user to measure and report multiple fetus
development. The system is capable of reporting a maximum
of four fetuses.
If the Multigestational Option has been purchased, an extra
entry appears on the Patient Entry Menu to the right of
"RefMD:". This entry is called "FETUS NUMBER:". The factory
default number is one.
It is generally during the first exam that the user recognizes a
multiple gestation. If during the first exam more than one fetus
is imaged, the user can use the ID/Name key to return to the
Patient Entry Menu and enter the necessary number of fetuses.
For subsequent exams the user enters the correct number of
fetuses when the New Patient key is used.
NOTE: Data Management Center transfer function will not work
if the fetus number is greater than one. An error message will
appear:
"Multigestation data transfer is not supported"
DMC data transfer will function normally if the fetus number is
set to one.
(software option)
LOGIQ
500 Advanced Reference Manual
2276614–100 Rev. 0