System Features; Logiq 500'S Features - GE LOGIQ 500 Advanced Reference Manual

System Features

LOGIQ 500's Features
1–2
The LOGIQ 500 digital Ultrasound System is a high
performance ultrasound imaging system, intended for general
purpose applications.
The system provides image generation in B-Mode, M-Mode,
Pulsed, CW and Color Flow Doppler and Color M-Mode with all
transducer types. Digital architecture allows maximum flexibility
of all scanning modes and transducer types, throughout the full
spectrum of operating frequencies.
All transducers are precise solid state array devices, allowing
electronically controlled imaging with Phased Array Sector,
Convex, Micro-convex and Steered Linear probes. Use of solid
state digital designs allows a wide variety of scan parameters to
be optimized including focusing, scan control, spatial resolution,
temporal resolution and contrast resolution. The result is
consistent generation of finely detailed anatomical resolution
with excellent dynamic contrast tissue range and penetration.
LOGIQ 500 also features newly integrated specialized
processing for Flow Data acquisition. Doppler information is
displayed with low noise and clean spectral content to optimize
measurements of important flow parameters. Selected probes
can operate in Multifrequency Mode in order to Optimize
Resolution in B-Mode and Sensitivity to flow in Doppler and
Color Flow Modes.
The system display processor is highly versatile to produce the
optimal set of imaging parameters and display formats without
compromising important diagnostic information. Comprehensive
graphical displays allow rapid and easy placement of Doppler
sample volumes. In Color Flow Mode, combined B-Mode and
Color Flow images can be steered independently so that optimal
positioning is available in both modes.

System Features

LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0