Fetal Trend Management (Software Option); Overview; Storing Patient Information - GE LOGIQ 500 Advanced Reference Manual

Fetal Trend Management

Overview

Storing Patient Information

4–8
Fetal Trend Management
Fetal Trend Management is an option to the LOGIQ
Calculation package that enhances the user's ability to monitor
the development of the fetus.
If patient data, measurements and calculations are saved
during the initial examination, this information can be compared
to results of follow up examinations. The OB Graph function
can be used to display the current data or combine the current
data with past data to show a fetal growth trend.
When previous measurement data is saved, all other
information, which is input at the Patient Entry Menu, is
retained. This information is automatically displayed in the
Patient Entry Menu on subsequent exams when the patient ID
is entered in the Patient Entry Menu.
If the previous measurement data was saved on MOD, the
MOD must be inserted before inputting the patient ID in the
Patient Entry Menu.
After an OB examination, the user can save the resultant
patient data to two different types of media.
The user can save the patient data to the system hard disk.
While this offers the convenience of not maintaining removable
media, the system hard disk's storage capacity is very limited.
A Magnetic Optical Disk (MOD) would be the best storage
media. Although this removable disk must be maintained by
the user, it offers far greater storage capacity. Approximately
one year's worth of information can be stored on one disk.
(software option)
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
500 OB