Advanced Cardiac Reports - GE LOGIQ 500 Advanced Reference Manual

Advanced Cardiac Calculations

Advanced Cardiac Reports

Overview
Figure 4–80. Standard Cubed Method Report Page
4–96
The averaging function for AMCAL measurements can be set to
a maximum of five measurements. The "Average Number"
preset, located on Preset Program page 3, sets the default for
the AMCAL measurements.
Two types of report formats are supported by the LOGIQ
Advanced Cardiac Calculation option.
The first format is the standard display that shows a separate
page for each of the first layer menu choices (i.e. Cubed
Method, Bullet Method, PSAX-AV, D-MV, etc.). Along with the
patient information are the measured values, their average and
the calculated values.
Two examples are shown in Figure 4–80 and Figure 4–81.
<AVG> or <LAST> indicates that the Average or Latest value
will be displayed in this column. This depends on the preset,
Average Activity , in the Setup/Preset Program menu page 3.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
500