Manual Modes - Delta DVP-PM Series Applications Manual

3.12.2 Manual Modes

1. There are 8 manual modes in DVP-PM
1. Mechanical zero return
2. JOG mode
3. Single-speed positioning
4. Single-speed positioning interruption
5. Externally triggering single-speed positioning*
Note*: Only DVP-20PM supports this function
2. When several manual modes are enabled at the same time, they will be processed in the following order.
1. STOP
2. Mechanical zero return
3. JOG+ mode
4. JOG- mode
5. MPG input
6. Variable speed mode
When one of the manual modes is being executed and another manual mode is enabled, DVP-PM will
remain the operation of the executing manual mode.
3. There are two types of pulse acceleration/deceleration curves.
1. Trapezoid curve
DVP-PM Application Manual
3
Functions of Devices in DVP-PM
6. 2-speed positioning
7. 2-speed positioning interruption
8. Variable speed mode
9. MPG input
7. Single-speed positioning
8. Single-speed positioning interruption
9. Externally triggering single-speed positioning
10. 2-speed positioning
11. 2-speed positioning interruption
2. S curve
3-77