After The Installation Of The Product; Automower ® Connect - Husqvarna Automower 535 AWD Operator's Manual

5. Remove the wheel brush covers in the rear
of the product. Lift the front-end of the wheel
brush cover and push forward.
6. Install the rear wheel brushes.
20 - Installation
7. Attach the wheel brush covers.
8. Install the front top cover. Refer to
the front top cover on page 30 .
9. Install the rear top cover. Refer to
the rear top cover on page 32 .

3.10 After the installation of the product

3.10.1 To do a visual check of the charging
station
1. Make sure that the LED status indicator on
the charging station has a green light.
2. If the LED status indicator does not have a
green light, do a check of the installation.
Indicator lamp in the charging
Refer to
station on page 39 and To install the
charging station on page 17 .
®
3.11 Automower Connect
The product has Automower
from factory.
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range
®
Bluetooth connectivity.
The product can connect to mobile devices that
®
have the Automower Connect app installed.
®
Automower Connect is a free app for your
mobile device. The Automower
gives extended functions to your Husqvarna
product. You can:
To install
To install
®
Connect included
®
Connect app
1055 - 001 - 04.02.2019