Husqvarna Automower 535 AWD Operator's Manual page 10

Hide thumbs Also See for Automower 535 AWD:
Table of Contents

Advertisement

Switch on the product according to the
instructions. When the product is switched
on; make sure to keep your hands and feet
away from the rotating blades. Never put
your hands and feet under the product.
Never touch moving hazardous parts, such
as the blade disc, before it has come to a
complete stop.
Never lift up the product or carry it around
when it is switched on.
The product must never be allowed to
collide with persons or other living creatures.
If a person or other living creature comes in
the way of the product, it shall be stopped
immediately. Refer to
page 27 .
Do not put anything on top of the product or
its charging station.
Do not allow the product to be used with a
defective guard, blade disc or body. Neither
should it be used with defective blades,
screws, nuts or cables. Never connect a
damaged cable, or touch a damaged cable
before it is disconnected from the supply.
Do not use the product if the STOP button
does not work.
Always switch off the product when it is not
in use. The product can only start when the
correct PIN code has been entered.
The product must never be used at the
same time as a sprinkler. Use the timer
function so the product and sprinkler never
run simultaneously. Refer to
21 .
Husqvarna does not guarantee full
compatibility between the product and other
types of wireless systems such as remote
controls, radio transmitters, hearing loops,
underground electric animal fencing or
similar.
10 - Safety
To stop the product on
Timer on page
The built-in alarm is very loud. Be careful,
especially if the product is handled indoors.
Metal objects in the ground (for example
reinforced concrete or anti-mole nets) can
result in a stoppage. The metal objects can
cause interference with the loop signal
which then can lead to a stoppage.
Operation and storage temperature is 0-50
°C / 32-122 °F. Temperature range for
charging is 0-45 °C / 32-113 °F. Too high
temperatures might cause damage to the
product.
2.3.2 Battery safety
WARNING: Lithium-ion batteries can
explode or cause fire if disassembled,
short-circuited, exposed to water, fire,
or high temperatures. Handle carefully,
do not dismantle, open the battery or
use any type of electrical/mechanical
abuse. Avoid storage in direct sunlight.
For more information about the battery, refer to
Battery on page 32
2.3.3 How to lift and move the product
To safely move the product from or within the
work area:
1.
Push the STOP button to stop the product.
2.
Push the On/Off-button for 3 seconds to
switch off the product.
3.
Make sure that the LED status indicator is
not lit.
4.
Carry the product by the lifting handle as the
illustration shows.
1055 - 001 - 04.02.2019

Advertisement

Table of Contents
loading

Table of Contents