After The Installation Of The Product; Automower ® Connect - Husqvarna AUTOMOWER 435X AWD Operator's Manual

7. Put the boundary wire or the guide wire into
position with stakes.
8. Connect the charging station to the power outlet.

3.9 After the installation of the product

3.9.1 To do a visual check of the charging
station
1. Make sure that the indicator LED lamp on the
charging station has a green light.
2. If the indicator LED lamp does not have a green
light, do a check of the installation. Refer to
indicator of the charging station on page 44 and
To install the charging station on page 17 .
®
3.10 Automower Connect
®
Automower Connect is a free app for your mobile
device. Use the app for installation, settings and
operation of your product. You can also find more
information for example about alarm and statistics in the
®
Automower Connect app.
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range Bluetooth
connectivity.
20 - Installation
• Dashboard that shows the current status of the
product and the battery state of charge.
Note:
All countries do not support cellular connection
®
to Automower Connect because of regional specified
cellular systems. The included Automower
lifetime service only applies if there is a third part sub-
supplier of available in the operational area.
LED
3.10.1 To install the Automower
app
1. Download the Automower
mobile device.
2. Sign up for a Husqvarna account in the
®
Automower
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
®
4. Log in to your Husqvarna account in the
Automower ®
3.10.2 To pair Automower
the product
1. Do step 1-6 in
on page 21 .
2. Obey the instructions in the Automower
app.
®
Connect
®
Connect
® Connect app on your
Connect app.
Connect app.
®
Connect and
To start the product for the first time
®
Connect
1404 - 013 - 20.12.2022