Husqvarna Automower 535 AWD Operator's Manual page 24

Time lock
A time lock can be set to decide how many days
will pass before the PIN code must be entered.
This means that the product cannot be operated/
controlled without first entering the correct PIN
code. When the time limit has passed the product
continues to mow as normal, but the PIN code
must be entered before any new commands or
settings can be done. When the PIN code is
entered, the product is ready to continue
operating. A setting between 1 to 100 days is
possible, and the default setting is 30 days.
Require PIN code
This function means that the product cannot be
operated or controlled after the STOP button has
been pushed without first entering the correct PIN
code. If the incorrect PIN code is entered 5 times,
the product is locked for a time. The lock is
extended for each new incorrect try.
Alarm duration
There is a possibility to set how long the alarm
signal should last. A setting between 1 and 10
minutes is possible.
STOP button pressed
"STOP button pressed" is enabled,
If the alarm
the alarm goes off if someone presses the STOP
button. To avoid alarm, the operator must be
within short-range (Bluetooth
Note: After an alarm has been triggered, you
must be close by the product, and clear the alarm
in the app by entering the PIN code (only
available for short-range Bluetooth
connectivity).
Carried away
Carried away is enabled, the product
If the alarm
senses unexpected motions, and the alarm goes
off.
3.13.7.4 GeoFence
GeoFence is a GPS-based theft protection that
makes a virtual fence for the product. You will get
a message if the product is moved on the other
side of the GeoFence.
®
3.13.8 Automower Connect, app settings
®
(Bluetooth only)
Automower ®
In
enable/disable the Automower
Connect module. You can also see the
24 - Installation
®
).
®
Connect you can
®
signal strength, connectivity status,
initiate new pairing or remove the
product from the paired accounts.
3.13.9 Messages
In this menu the previous fault and information
messages can be found. For some of the
messages, there are tips and advice to help to
rectify the fault.
If the product is disrupted in any way, for
example it is trapped or the battery is low, a
message is saved relating to the disruption and
the time it happened.
If the same message is repeated several times,
this may indicate that an adjustment to the
installation or the product is required. Refer to
Installation on page 12 .
3.13.10 My mowers
My mowers you can manage
When you choose
all the products paired to your account, as well as
add new ones. If there are several paired
products it is possible to select one of them as
Current mower.
To pair a new product to the Automower
Connect app:
1. Select the plus sign (+).
2. Select model.
3. Obey the instructions in the Automower
Connect app to finish the pairing.
®
3.13.11 Automower Direct
®
Automower Direct uses short-range Bluetooth
communication, and is included in Automower
535 AWD.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity.
It is possible to communicate with the product
®
through Bluetooth if you are in short-range of
the product. You can use Automower
without a Husqvarna account as long as you
have the product PIN code.
3.13.11.1 To start to use Automower
1. Download the Automower
your mobile device.
®
2. Select Automower Direct on the start
screen of the Automower
®
®
®
®
®
Direct
®
Direct
®
Connect app on
®
Connect app.
1055 - 001 - 04.02.2019