To Stop The Product; To Switch Off The Product; To Charge The Battery - Husqvarna Automower 535 AWD Operator's Manual

4.2.3.1 Park until further notice
The product stays in the charging station until
another operating mode is selected.
4.2.3.2 Park for a specific number of hours
The product stays in the charging station for a
chosen number of hours and then automatically
returns to normal operation according to the
timer. This operation selection is suitable when
there is a need to pause operation, e.g. for
temporary irrigation or for games on the lawn.

4.3 To stop the product

1. Press the STOP button on top of the
product.
The product stops and the blade motor stops.

4.4 To switch off the product

1. Push the On/Off button on top of the
product.
2. Make sure that the LED status indicator
goes out.
1055 - 001 - 04.02.2019
Note: If the LED status indicator is lit or is
flashing in any color the product is not
switched off. Refer to
on page 6 .
WARNING: Always switch off the
product if it requires maintenance, or if
the product must be moved outside the
work area.

4.5 To charge the battery

When the product is new or has been stored for a
long period, the battery can be dead and needs
to be charged before starting. In the Main area
mode, the product automatically alternates
between mowing and charging.
WARNING: Only charge the product
using a charging station and a power
supply which is intended for it.
Incorrect use may result in electric
shock, overheating or leakage of
corrosive liquid from the battery.
In the event of leakage of electrolyte
flush with water and seek medical help
if it comes in contact with the eyes etc.
1. Place the product in the charging station.
2. Slide the product in as far as possible to
ensure proper contact between the product
and the charging station.
3. The battery status can be monitored on the
status bar of the display.
Note: If the battery is empty the product needs to
charge for a certain time period before the
product is possible to start.
LED status indicator
Operation - 27