Data Transmission Between Actuator And Memory Pen - Samson 5757-7 Mounting And Operating Instructions

2. Select Interface in the Memory Pen menu.
3. Click the Start button in Automatic detection field of the dialog box. The computer auto-
matically searches for the interface assigned to the memory pen.
Message: "Memory pen found at COM ..."
Confirm interface setting by clicking OK button.
Downloading data from TROVIS-VIEW to the memory pen
4. Select Download to Memory pen in Memory pen menu
5. Click OK button to start data transmission.
Uploading data from memory pen to TROVIS-VIEW
4. Select Upload from Memory pen in Memory pen menu to start data transmission.

7.2.2 Data transmission between actuator and memory pen

4
Perform steps 1 to 3 described in section 7.2.1.
Fig. 14 · Type 5757-7 – memory pen
4
3
Data transmission
3 Memory pen
4 Serial interface
(RJ 12 jack)
EB 5757-7 EN
35