Activating/Deactivating Functions - Samson 5757-7 Mounting And Operating Instructions

6.3.1 Activating/deactivating functions

1. Click on Configuration folder to view the function block settings.
2. Double-click the function block status (0 or I) to change the status of the function.
Right-click on a row to open pop-up win-
dow to modify configuration settings:
Modify
To change the status of the function block.
Read Uploads status of the function block from device.
Write Downloads status of the function block to device.
Default: ... Resets function block to default setting
(setting in gray to indicate that the status of the
function block is the same as the default setting)
Configuration and operation using TROVIS-VIEW interface
27
EB 5757-7 EN