Offline Operation (Indirect Data Transmission); Online Operation (Direct Data Transmission) - Samson 5757-7 Mounting And Operating Instructions

Data transmission

7.1.1 Offline operation (indirect data transmission)

In offline mode, there is no constant data communication between the PC and actuator.
Communication must first be established to upload from the actuator and download data to
the actuator.
Downloading data to the actuator:
Select Download to the device in Device menu to transfer data to the actuator. The actuator
starts to control after data are downloaded from TROVIS-VIEW.
Uploading data from the actuator:
Select Upload from device in Device menu to transfer all the data from the actuator.
Uploaded data are indicated in TROVIS-VIEW by the icon.
Note!
Data transmission can also be performed by clicking the icons in the device toolbar:
click to download data from TROVIS-VIEW to the actuator and, click to upload data
from the actuator and to display them in TROVIS-VIEW.

7.1.2 Online operation (direct data transmission)

The actuator and TROVIS-VIEW are constantly connected in online operation. Current con-
figuration and operating data are uploaded from the actuator cyclically and displayed in
TROVIS-VIEW. Likewise, any settings performed in TROVIS-VIEW are directly transferred to
the actuator.
In the event of a sensor breakage, the interruption in sensor connection is shown without de-
lay in the Sensors folder.
Activate online operation:
Select Online in Device menu to activate online mode.
In online mode, in the device toolbar is animated.
Deactivate online operation:
Select Online in Device menu while the online mode is activated.
The online mode is cancelled.
Note!
Alternatively, click in the device toolbar to activate and deactivate online operation.
33
EB 5757-7 EN