2
Connection to the valve
The actuator has a force-locking connection
to the valve in de-energized state.
4
Turn the handwheel (2) counterclockwise
to retract the actuator stem as far as it
will go.
4
Place the actuator on the valve connec-
tion and screw coupling nut (4) tight
(tightening torque 20 Nm).
2.1
Mounting position
Any mounting position may be used, how-
ever, may not be installed in a suspended
position.
Fig. 3 · Connecting actuator and valve
Connection to the valve
2
2 Handwheel
3 Actuator stem
4 Coupling nut
EB 5757-7 EN
7