Data Transmission Between Trovis-View And The Actuator (Connecting Cable) - Samson 5757-7 Mounting And Operating Instructions

Data transmission
Note!
You can only transfer data to the controller with electric actuator after the electrical connec-
tion has been made as described in section 3.
7.1 Data transmission between TROVIS-VIEW and the actuator
(connecting cable)
1. Connect the serial port of the PC using
the SAMSON connecting cable to the se-
rial interface connection of the actuator.
2. Select Communications in Options menu
to open the server settings window. Click
Server settings button.
3. Check Local connection and Auto-
matically local connect boxes and click
on OK button to confirm server settings.
The Communication window reappears.
4. Click Port settings button.
5. The settings window opens and
State: not yet searched appears in the
Automatic detection field.
Click on Start button.
TROVIS-VIEW has found the actuator
when State: Device found on ....
appears, click on OK button twice to
confirm settings.
32
EB 5757-7 EN