Home Leave Operation - Daikin RMXS-L Series Service Manual

SiUS181305E
7.9

HOME LEAVE Operation

Outline
CTXS-J, CTXS-H Series
HOME LEAVE operation is a function that allows you to record your favorite set temperature and
airflow rate. You can start your favorite operation mode simply by pressing the HOME LEAVE
button on the remote controller.
Detail 1. Start of Function
The function starts when the HOME LEAVE button is pressed in cooling mode, heating mode
(including POWERFUL operation), or while the operation is stopped. If this button is pressed in
POWERFUL operation, the POWERFUL operation is canceled and this function becomes effective.
 The HOME LEAVE button is ineffective in dry mode and fan mode.
2. Details of Function
A mark representing HOME LEAVE is indicated on the display of the remote controller. The indoor
unit is operated according to the set temperature and airflow rate for HOME LEAVE which were
pre-set in the memory of the remote controller.
The LED (red) of indoor unit representing HOME LEAVE lights up. (It goes out when the operation
is stopped.)
3. End of Function
The function ends when the HOME LEAVE button is pressed again during HOME LEAVE
operation or when the POWERFUL button is pressed.
HOME LEAVE operation
set temp.
HOME LEAVE operation
set temp.
Function
<Cooling>
Set temp.
Normal operation
<Heating>
Set temp.
Normal operation
Function of CTXS, FTXS, CDXS, FDXS Series
HOME LEAVE operation
Start Stop
HOME LEAVE operation
Start Stop
Normal operation
Time
(R1366)
Normal operation
Time
(R17859)
70