Daikin RMXS-L Series Service Manual page 80

Function of CTXS, FTXS, CDXS, FDXS Series
How to Set the Temperature and Airflow Rate
When using HOME LEAVE operation for the first time, set the temperature and airflow rate for
HOME LEAVE operation. Record your preferred temperature and airflow rate.
Cooling
Heating
1. Press the HOME LEAVE button.
2. Adjust the temperature with
3. Adjust the airflow rate with the FAN setting button as you like.
HOME LEAVE operation will run with these settings the next time you start HOME LEAVE
operation. To change the recorded information, repeat steps 1 – 3.
 The set temperature and airflow rate are memorized in the remote controller. When the remote
Others
 The operation mode cannot be changed while HOME LEAVE operation is being used.
71
Initial setting
Temperature
25°C (77°F)
25°C (77°F)
Make sure is displayed on the remote controller display.
controller is reset due to replacement of battery, it is necessary to set the temperature and
airflow rate again for HOME LEAVE operation.
Airflow rate Temperature
18 ~ 32°C (64.4 ~ 89.6°F)
10 ~ 30°C (50 ~ 86°F)
or as you like.
SiUS181305E
Selectable range
Airflow rate
5 steps, ,
5 steps, ,
Function