Home Leave Operation - Daikin CTXS09GVJU Service Manual

Main Functions
1.9

HOME LEAVE Operation

Outline
Addressing the customer's need for immediate heating and cooling of the room after returning
home, or for house maintenance, you may switch the temperature and air volume from normal
time to outing time by one touch. This function also stabilizes irregular cooling or heating. .
Details of the
1. Start of Function
The function starts when the [HOME LEAVE] button is pressed in cooling mode or heating mode
Control
(including stopping and powerful operation). If this button is pressed while the operation is stopped,
the function becomes effective when the operation is started. If this button is pressed in powerful
operation, the powerful operation is reset and this function becomes effective.
2. Details of Function
A mark representing [HOME LEAVE] is indicated on the liquid crystal display of the remote
controller. The indoor unit is operated according to the set temperature and air volume for HOME
LEAVE which were preset in the memory of the remote controller.
The LED (Red) of indoor unit representing [HOME LEAVE] lights up. It goes out when the operation
is stopped.
3. End of Function
The function ends when the [HOME LEAVE] button is pressed again during [HOME LEAVE]
operation or when the powerful operation button is pressed.
Others
The set temperature and set air volume are stored in the remote controller. When the remote
controller is reset due to replacement of battery, it is necessary to set the temperature and air
volume again for [HOME LEAVE].
34
The [HOME LEAVE] button is ineffective in dry mode and fan mode.
SiUS12-814
Function and Control