Daikin RMXS-L Series Service Manual page 141

SiUS181305E
1. Operation mode
Used to display the current operation

mode: Cool, Heat, Vent, Fan, Dry or Auto.
 In Auto mode, the actual operation mode
(Cool or Heat) will be also displayed.
 Operation mode cannot be changed when
OFF is displayed.
Operation mode can be changed after
starting operation.
2. Fan Speed
Used to display the fan speed that is set for

the indoor unit.
 The fan speed will not be displayed if the
connected model does not have fan speed
control functionality.
3. Setpoint display
 Used to display the setpoint for the indoor
unit.
 Use the Celsius/Fahrenheit item in the
main menu to select the temperature unit
(Celsius or Fahrenheit).
4. Stand by for Defrost/Hot start
STANDBY
If ventilation icon is displayed in this field:
Indicates that an energy recovery ventilator

is connected.
For details, refer to the Operation Manual
of the ERV.
5. Message
The following messages may be
displayed.
This function is not available
Displayed for a few seconds when an

Operation button is pressed and the indoor
unit does not provide the corresponding
function.
 In a remote control group, the message will
not be displayed if at least one of the indoor
units provides the corresponding function.
Remote Controller
Error: Push Menu button
Warning: Push Menu button
 Displayed if an error or warning is detected.
Time to clean filter
Time to clean element
Time to clean filter & element
Displayed as a reminder when it is time to

clean the filter or element.
6. Ventilation
Displayed when a energy recovery

ventilator is connected.
Ventilation Mode icon. (

These icons indicate the current ventilation
mode (ERV only) (AUTO, ERV, BYPASS).
AIR
Air Purify ICON (

PURIFY
This icon indicates that the air purifying unit
(option) in operation.
7. display
 Displayed when the key lock is set.
8. display
Displayed if the Schedule or Off timer is

enabled.
9. Under Centralized control
Displayed if the system is under the

management of a multi-zone controller
(option) and the operation of the system
through the remote controller is limited.
10.Changeover controlled by the
master indoor unit
(VRV only)
 Displayed when another indoor unit on the
system has the authority to change the
operation mode between cool and heat.
FFQ09/12/15/18LVJU
AUTO ERV BYPASS
)
ERV
)
CENTRAL
CONTROL
MASTER
CONTROLLED
132